User manual

ATU-R130 ADSL Ethernet Router User’s Guide

8. You will see “Entry created” then you have to type “commit” to save this entry.

Part 1. Installing the USB Driver:{ XE "USB:installing driver" }

1. Ensure that the USB cable is not connected to the USB port on the PC or to the

USB port on the ATU-R130. The installation program will prompt you when to

connect the cable.

2. Copy the USB installation file to a temporary directory on the USB computer.

3. In the folder where you copied the files, double-click on setup.exe to start the

installation program. The Welcome dialog box displays, as shown in Figure :

Figure 4. USB Driver Installation: Welcome Screen

4. Click to display the Software License Agreement dialog box, as

shown in Figure .

Figure 5. USB Driver Installation: Software License Agreement

5. After reviewing the license agreement, click to continue.

6. If a Microsoft digital signature dialog box displays, click to continue.