Network Router User Manual

ADSL IP DSLAM
59
<action> <parameter> Description
(alarmprof-atur) <Thresh15MinLofs>
<Thresh15MinLoss>
<Thresh15MinLprs>
<Thresh15MinESs>
Modify the threshold value of
RT side alarms
config
connection
< port no.> <PVC1>
<PVC2> <AdminStatus>
[VID] [Priority]
Modify pvc (vpi/vci) and VLAN
ID by specifying a port.
config lineprof <profile name> Modify existing line profile.
(lineprof-atuc) <RateMode>
<RateChanRatio>
<TargetSnrMargin>
<MinTxRate> <MaxTxRate>
<MaxInterleaveDelay>
Modify the configuration of CO
side of line profile.
(lineprof-atur) <RateMode>
<RateChanRatio>
<TargetSnrMargin>
<MinTxRate> <MaxTxRate>
<MaxInterleaveDelay>
Modify the configuration of RT
side of line profile.
config manip <IP> [musk]
A
llow you to modify the existing
management IP
config password None Change the user’s password
config port <all|port#> <up | down> Set the state of ADSL port.
config portfilter <enable|disable> Port filttering configuration
config snmp <community> [SNMP VID] Modify the SNMP VID and
community.
config subscriber < port no.> Modify subscriber information
for specific port.
(subscriber) <subscriber name>
<telephone number> <Note>
Modify subscriber information
by arguments.
config sysinfo
(system name)
(location)
(contact)
(console name)
Modify the information of
system by modifying system
name, location, contact and
console name.
config sysip <IP> <submask> <gateway> Modify the IP arguments of
system.
config time <date> <time>
config user <User-name>
<Administraot|operator|gues
t
Modify user’s account and
privilege.
config igmps None Configure IGMP snooping
config sntp <enable/disable> Configure SNTP status
config sntp
timezone
<timezone> Configure local time zone
delete alarmprof <profile name> Delete ADSL alarm profile by
selecting alarm profile name.
delete
connection
</port no.> <vpi/vci> Delete pvc by selecting (vpi/vci)
of ADSL IP DSLAM port no.
delete event none Delete all event information