Network Router User Manual

ADSL IP DSLAM
57
adslchannel
Allow users to view the channel layer parameters of ADSL
lines.
adslphysical
Allow users to view the physical layer parameters of ADSL
lines.
adslchperf
Allow users to view the performance statistics collected on
channel layer of ADSL line.
adslchintl
Allow users to view the statistics information collected on
channel layer within 15-minutes or 1-day interval.
adslphperf
Allow users to view the performance statistics collected on
physical layer of ADSL lines.
adslphintl
Allow users to view the statistics information collected on
physical layer within 15-minutes or 1-day interval.
igmpconf Allow users to view or config the configurations of IGMP.
igmpgroup Allow users to view the IGMP groups.
igmppm Allow users to view and reset the IGMP PM.
ethermode Allow users to view and configure Ethernet rate mode
dhcpd Allow users to view and configure DHCP server
Table 4-3 Relation between <action> and <identifier>
<action> <identifier>
adslchannel adslchintl adslchperf adslline adslphintl
adslphperf adslphysical alarmprof connection event
lineprof manip port portfilter snmp
sysinfo sysip subscriber time trapdest
user vid rip igmps sntp
show
route ethermode dhcpd
alarmprof connection lineprof manip trapdest
add
user sntp
adslline alarmprof connection lineprof manip
password port portfilter snmp subscriber
sysinfo sysip time user sntp
config
ethermode dhcpd
user event trapdest connection lineprof
delete
alarmprof manip route sntp
Help show/add/config/delete/…… /show sysinfo/config time/……..
history None
reset port
restart None
Save None
Default None
Upgrade Enable / disable
exit None
Table 4-4 CLI Command – Parameter List
<action> <parameter> Description
all
A
llow you to view all
information.
show <identifier>
< port no.> Allow you to view the specified
port’s information.