Quick Start Guide

support@ctadigital.com

INSTRUCTION MANUAL

PAD-ASK13B

Package Contents

Case connector

Base connector

Key

Lock

Insert tube into case

connector and tighten

screws on both sides

Tube

Base

Insert tube into base connector and

tighten all 4 screws

Stylus

PAGE 1
INSTRUCTION MANUAL PAD-ASK13B Package Contents Lock Case connector Key Insert tube into case 1 connector and tighten screws on both sides Stylus Tube Base Base connector 2 Insert tube into base connector and tighten all 4 screws support@ctadigital.
PAGE 2
1) Place the stand on a flat surface. 2) Adjust the enclosure to the horizontal position, then insert the key and turn clockwise to release the lock. Remove enclosure faceplate. Unlocked 3) Place iPad Pro into the enclosure tray, and then place faceplate on top. Faceplate iPad 1 2 Enclosure tray 4) Close the enclosure and press the lock button. Optional accessories Stick adhesive pads to bottom of stand base for scratch protetion and temporary mounting.