Owners manual

14385 Veterans Way Moreno Valley, CA 92553
Phone: [phone] Fax: [phone]
CSJ-C18-7
1999-2010 CHEVY
CST HIGH ANGLE PRO-JOINT
READ THE FOLLOWING NOTES PRIOR TO INSTALLATION
DO NOT ALTER THE FINISH OF ANY COMPONENTS. CHANGING THE FINISH SUCH AS
CHROMING, ZINC-PLATING, OR ANY TYPE OF PAINTING CAN CAUSE STRUCTURAL
FATIGUE OF COMPONENTS.
PRIOR TO INSTALLATION, COMPARE THE PARTS LIST WITH THE COMPONENTS RECEIVED
IN THE KIT. IF ANY PIECES ARE MISSING PLEASE CONTACT YOUR LOCAL RETAILER OR
CST PERFORMANCE SUSPENSION AT 951-571-0212, AND YOU WILL BE TAKEN CARE OF IN A
TIMELY MANOR.
READ ALL INSTRUCTION FROM START TO FINISH BEFORE BEGINNING
INSTALLATION. IF THESE INSTRUCTIONS ARE NOT PROPERLY FOLLOWED, SEVERE
FRAME, TIRE, OR SUSPENSION DAMAGE MAY RESULT TO THE VEHICLE. IF YOU INCUR
A PROBLEM DURING THE INSTALLATION OF THIS KIT, FIRST BE SURE YOU HAVE
FOLLOWED THE INSTRUCTION FROM START TO FINISH ACCURATELY AND IF SO
PLEASE CALL 951-571-0212; WE WILL DO OUR BEST OVER THE PHONE TO ASSIST YOU
WITH YOUR PROBLEM, OR DIRECT YOU ACCORDINGLY.
VEHICLES THAT RECEIVE OVER SIZED TIRES SHOULD CHECK PRO-JOINTS AND TIE ROD
ENDS, AS WELL AS GENERALLY INSPECT THE ENTIRE SUSPENSION FRONT TO REAR
EVERY 1000-3000 MILES FOR WEAR AND REPLACE PARTS AS NEEDED.