Product Manual

Thank you for purchasing the CST/Berger LMPL20 Electronic Self-Leveling Pipe Laser level.

The LMPL20 pipe laser tool has many unique features such as a High Powered Red laser

beam, which makes accurately locating the center of the beam easy. The Unique High

Powered Red Laser beam also increases the visibility of the laser over long distances-

inside or outside the pipe.

Note: Please read this manual thoroughly before operation

MODEL

59-LMPL20 Pipe Laser, 12 VDC Ext. Power Cable, NiMH Battery Charger, NiMH Battery Pack, Alkaline

Battery Pack, Small Target, Large Target, Target Holder, Carrying Case, Leg Set,

Remote Control RC20, Instruction Manual, Warranty Card.

The information contained herein is proprietary information of Robert Bosch Tool Corporation and is subject to

change without notice.

This document shall not be copied or otherwise reproduced without Robert Bosch Tool Corporation’s

written consent.

SAFE OPERATING PROCEDURES

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure

WARNING: Be sure to read and understand all instructions in this manual before using this product.

Failure to follow all instructions may result in hazardous radiation exposure, electric shock, fire, and/or

bodily injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified in this

manual, may result in hazardous radiation exposure.

CAUTION: The use of optical instruments with this product will increase eye hazard.

IMPORTANT: The following labels are on your LMPL20 for your convenience and safety. They indicate where

the laser light is emitted by the level. ALWAYS BE AWARE of their location when using the level.

ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of looking directly

into the pipe laser tool .

DO NOT remove or deface any warning or caution labels. Removing labels increases the risk of exposure to

laser radiation.

DO NOT stare directly at the laser beam or project the laser beam directly into the eyes of others. Serious eye

injury could result.

DO NOT place the pipe laser tool in a position that may cause anyone to stare into the laser beam intentionally

or unintentionally. Serious eye injury could result.

DO NOT use any optical instruments such as, but not limited to, telescopes or transits to view the laser beam.

Serious eye injury could result.

ALWAYS remove the batteries when cleaning the laser light aperture or laser lens.

DO NOT operate the pipe laser tool around children or allow children to operate the pipe laser tool . Serious

eye injury could result.

ALWAYS turn the pipe laser tool "OFF" when not in use. Leaving the pipe laser tool "ON" increases the risk of

someone inadvertently staring into the laser beam.

6 • LMPL20

ACCORDING TO IEC/EN 60825-1: 2007