User's Manual

Configuration Scan2CRM for Act! Window
12 Scan2CRM for Act! User Guide, version 3.5
Calibrating the scanner

Open Act!

Open the Scan2CRM for Act! window

Click the ‘Calibrate Scanner’ button.

Insert the calibration paper that came with
the scanner (the paper sheet with black
stripes). Please make sure that the side of
the calibration paper with the black stripes is
facing down.

Click OK.
Note: The scanner must be calibrated before
the first use.
Cleaning the scanner
It is recommended to clean the scanner from
time to time, especially if you notice
irregularities and deterioration in scanning and
OCR quality.

Open Act!

Open the Scan2CRM for Act! window. Click
the ‘Clean Scanner’ button.

Insert the cleaning paper that came with the
scanner. You can add a few drops of alcohol
or cleaning solution to the cleaning paper.

Click OK.