User guide

3BAppendix A: Troubleshooting
4. APPENDIX A: TROUBLESHOOTING
Description Solution
When I try to
enable Scan2
Contacts I get
an error
message,
which says
that another
CSSN
application is
open
Scan2Contacts can not work while another
CSSN application is running. To activate
Scan2Contacts, close the other application and
press on the state button in the toolbar.
I opened
Outlook and
got an error
message from
Scan2Contacts
Scan2Contacts failed to load. Check if the
scanner is connected properly, and press on the
state button in the toolbar. If Scan2Contacts is
not enabled, contact the support team.
I opened
Outlook but
can not find
Scan2Contacts
toolbar
Open Outlook's HELP menu –> About MS
Outlook –> Disabled Items (button) and enable
Scan2Contacts.
The application
state is set to
Disabled on
startup
Try to enable the application by pressing on the
state button. If this does not help, check if the
scanner is properly connected and try again
There are
irregularities or
deterioration in
scanning and
OCR quality
Clean and calibrate the scanner, see page 14.
After scanning,
the image is
black
Re-calibrate your scanner, see
Calibrating the
scanner
, page 14.
Scan2Contacts User Guide