Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 32 2012.12.10
Response
<n>
OK
Read Command
ATS8?
Parameter
See Write Command
Response
OK
ERROR
Write Command
ATS8=<n>
Parameter
<n> 0-255 The value of this register determines how long the modem
should pause when it sees a comma in the dialing string.
Reference
V.25ter
Note
No effect in GSM
2.2.23 ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier
ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier
Response
<n>
OK
Read Command
ATS10?
Parameter
See Write Command
Response
This parameter setting determines the amount of time that the TA will
remain connected in absence of data carrier. If the data carrier is once more
detected before disconnecting, the TA remains connected.
OK
ERROR
Write Command
ATS10=<n>
Parameter
<n> 1-15-254 Number of tenths seconds of delay
Reference
V.25ter
Note
2.2.24 ATT Select Tone Dialing
ATT Select Tone Dialing
Execution
Command
ATT
Response
OK