Specifications
Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 31 2012.12.10
2.2.20 ATS6 Pause Before Blind Dialling
ATS6 Pause Before Blind Dialling
Read Command
ATS6?
Response
ERROR
Response
OK
ERROR
Write Command
ATS6=<n>
Parameter
<n> 0..999 Time
Reference
V.25ter
Note
No effect in GSM
2.2.21 ATS7 Set Number of Seconds to Wait for Connection Completion
ATS7 Set Number of Seconds to Wait for Connection Completion
Response
<n>
OK
Read Command
ATS7?
Parameter
See Write Command
Response
This parameter setting determines the amount of time to wait for the
connection completion in case of answering or originating a call.
OK
ERROR
Write Command
ATS7=<n>
Parameter
<n> 1-60-255 Number of seconds to wait for connection completion
Reference
V.25ter
Note
z If called party has specified a high value for ATS0=<n>, call setup may
fail.
z The correlation between ATS7 and ATS0 is important
z Example: Call may fail if ATS7=30 and ATS0=20.
z ATS7 is only applicable to data call.
2.2.22 ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in Dial
String of D Command
ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in Dial
String of D Command