Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 24 2012.12.10
NO CARRIER
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to Command mode after call release
OK
If successfully connected and voice call
OK
Parameters
<str> String type (string should be included in quotation marks)
value ("x"), which should equal to an alphanumeric field in
at least one phone book entry in the searched memories. str
formatted as current TE character set specified by +CSCS.
<mgsm> String of GSM modifiers:
I Actives CLIR (Disables presentation of own number
to called party)
i Deactivates CLIR (Enable presentation of own number
to called party)
G Activates Closed User Group invocation for this call
only
g Deactivates Closed User Group invocation for this call
only
<;> Only required to set up voice call, return to Command state
Reference
V.25ter
Note
z Parameter "I" and "i" only if no "*#" code is within the dial string
z *# codes sent with ATD are treated as voice calls. Therefore, the
Command must be terminated with a semicolon ";"
z See ATX Command for setting result code and call monitoring
parameters.
2.2.6 ATDL Redial Last Telephone Number Used
ATDL Redial Last Telephone Number Used
Execution
Command
ATDL
Response
This Command redials the last voice and data call number used.
Note: This Command may be aborted generally by receiving an ATH
Command or a character during execution. The aborting is not possible