Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 235 2012.12.10
z When extend FTPPUT mode is activated, input data then execute
“AT+FTPPUT=1” to transmit, after session is complete, if successful,
it returns “+FTPPUT:1,0”, otherwise it returns
“+FTPPUT:1,<error>”, <error> see "AT+FTPGET".
z Not all the SIM900 series modules support this command.
11.2.21 AT+FTPMKD Make Directory on the Remote Machine
AT+FTPMKD Make Directory on the Remote Machine
Response
OK
Test Command
AT+FTPMKD=?
Parameter
Response
If success:
OK
+FTPMKD:1,0
If failed:
OK
+FTPMKD:1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Execution
Command
AT+FTPMKD
Parameter
<error> See "AT+FTPGET"
Reference Note
z The created folder is specified by the "AT+FTPGETPATH"
command.
z Not all the SIM900 series modules support this command.
11.2.22 AT+FTPRMD
Remove Directory on the Remote Machine
AT+FTPRMD Remove Directory on the Remote Machine
Response
OK
Test Command
AT+FTPRMD=?
Parameter