Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 209 2012.12.10
For other parameters, see the related command.
Execution
Command
AT+CIPSCONT
Response
Module saves current TCPIP Application Contexts to NVRAM. When
system is rebooted, the parameters will be loaded automatically.
OK
Reference Note
8.2.29 AT+CIPTXISS Discard Input AT Data in TCP Data Send
AT+CIPTXISS Discard Input AT Data in TCP Data Send
Response
+CIPTXISS : (list of supported <mode>s)
OK
Test Command
AT+CIPTXISS=
?
Parameter
See Write Command
Response
+CIPTXISS : <mode>
OK
Read Command
AT+CIPTXISS?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+CIPTXISS=
<mode>
Parameter
<mode> 0 Disable
1 Enable, discard the input AT data while the TCPIP data
is sent to serial port.
Reference Note
8.2.30 AT+CIPRDTIMER Set Remote Delay Timer
AT+CIPRDTIMER Set Remote Delay Timer
Test Command Response