Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 208 2012.12.10
Parameter
<mode> 0 Module returns FIN frame after module received FIN
frame from remote side.
1 Module returns RST frame after module received FIN
frame from remote side.
Reference
Note
z If RST frame instead of FIN frame is responded to remote side,
disconnection process will speed up.
z To enable this function, parameter <mode> must be set to 1 before
connection.
8.2.28 AT+CIPSCONT Save TCPIP Application Context
AT+CIPSCONT Save TCPIP Application Context
Response
TA returns TCPIP Application Context, which consists of the following
AT Command parameters.
+CIPSCONT: <mode0>
+CIPCSGP: <mode>
Gprs Config APN: <apn>
Gprs Config UserId: <user name>
Gprs Config Password: <password>
+CLPORT: <port>
+CIPHEAD: <mode>
+CIPSHOWTP: <mode>
+CIPSRIP: <mode>
+CIPATS: <mode>,<time>
+CIPSPRT: <send prompt>
+CIPQSEND: <n>
+CIPMODE: <mode>
+CIPCCFG: <NmRetry>,<WaitTm>,<SendSz>,<esc>
+CIPMUX: <n>
+CIPDPDP: <mode>,<interval>,<timer>
+CIPRXGET: <mode>
+CIPQRCLOSE: <mode>
+CIPUDPMODE: <mode>
+CIPRDTIMER : <rgsigtimer>,<rgmuxtimer>
OK
Read Command
AT+CIPSCONT
?
Parameters
<mode0> 0 Saved, the value from NVRAM
1 Unsaved, the value from RAM