Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 206 2012.12.10
+CIPRXGET: <mode>
OK
AT+CIPRXGET?
Parameters
See Write Command
Write Command
1) If single IP
connection
(+CIPMUX=0)
AT+CIPRXGET=
<mode>[,<reqleng
th>]
2) If multi IP
connection
(+CIPMUX=1)
AT+CIPRXGET=
<mode>,<id>[,<re
qlength >]
Response
OK
ERROR
1)For single IP connection
If “AT+CIPSRIP=1” is set, IP address and port are contained.
if <mode>=1
+CIPRXGET:1[,<IP ADDRESS>:<PORT>]
if <mode>=2
+CIPRXGET:2,<reqlength>,<cnflength>[,<IP ADDRESS>:<PORT>]
1234567890…
OK
if <mode>=3
+CIPRXGET:3,<reqlength>,<cnflength>[,<IP ADDRESS>:<PORT>]
5151…
OK
if <mode>=4
+CIPRXGET:4, <cnflength>
OK
2)For multi IP connection
If “AT+CIPSRIP=1” is set, IP address and port is contained.
if <mode>=1
+CIPRXGET:1,<id>[,<IP ADDRESS>:<PORT>]
if <mode>=2
+CIPRXGET:2,<id>,<reqlength>,<cnflength>[,<IP
ADDRESS>:<PORT>]
1234567890…
OK
if <mode>=3
+CIPRXGET:3,<id>,<reqlength>,<cnflength>[,<IP
ADDRESS>:<PORT>]
5151…
OK
if <mode>=4
+CIPRXGET:4, <id>,<cnflength>
OK