Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 200 2012.12.10
See Write Command
Response
OK
ERROR
Write Command
AT+CIPCSGP=
<mode>[,
(<apn>,<user
name>,
<password>),(<d
ial number>,
<user name>,
<password>,
<rate>)]
Parameters
<mode> A numeric parameter which indicates the wireless connection
mode
0 set CSD as wireless connection mode
1 set GPRS as wireless connection mode
GPRS parameters:
<apn> A string parameter(string should be included in quotation
marks) which indicates the access point name
<user name> A string parameter(string should be included in quotation
marks) which indicates the user name
<password> A string parameter(string should be included in quotation
marks) which indicates the password CSD parameters:
<dial number> A string parameter(string should be included in quotation
marks) which indicates the CSD dial numbers
<user name> A string parameter(string should be included in quotation
marks) which indicates the CSD user name
<password> A string parameter(string should be included in quotation
marks) which indicates the CSD password
<rate> A numeric parameter which indicates the CSD connection
rate
0 2400
1 4800
2 9600
3 14400
Reference Note
8.2.20 AT+CIPSRIP Show Remote IP Address and Port When Received Data
AT+CIPSRIP Show Remote IP Address and Port When Received Data
Response
+CIPSRIP: (list of supported <mode>s)
OK
Test Command
AT+CIPSRIP=?
Parameter
See Write Command