Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 179 2012.12.10
(A/Gb mode), or CS (Iu mode) (lowest
mode of operation).
MT would only operate
C S
services
Reference Note
It only supports Class B and CC.
7.2.9 AT+CGEREP Control Unsolicited GPRS Event Reporting
AT+CGEREP Control Unsolicited GPRS Event Reporting
Response
+CGEREP: (list of supported <mode>s),(
list
of supported <bfr>s)
OK
Test Command
AT+CGEREP=?
Parameters
See Write Command
Response
+CGEREP: <mode>,<bfr
>
OK
Read Command
AT+CGEREP?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CGEREP=<
mode>[,<bfr
>]
Parameters
<mode>
0 Buffer unsolicited result codes in the MT; if MT
result code buffer is full, the oldest ones is discarded.
1 Discard unsolicited result codes when MT TE link
is reserved (e.g. in on line data mode); otherwise
forward them directly to the TE.
2 Buffer unsolicited result codes in the MT when MT
TE link is reserved (e.g. in on line data mode) and
flush them to the TE when MT TE link becomes
available; otherwise forward them directly to the TE.
<bfr> 0 MT buffer of unsolicited result codes defined within
this command is cleared when <mode> 1 or 2 is
entered.