Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 132 2012.12.10
Reference Note
6.2.9 AT+CDSCB Reset Cell Broadcast
AT+CDSCB Reset Cell Broadcast
Execution
Command
AT+CDSCB
Response
OK
Reference Note
Please also refer to AT+CSCB.
6.2.10 AT+CMOD Configure Alternating Mode Calls
AT+CMOD Configure Alternating Mode Calls
Response
+CMOD: (0)
OK
Test Command
AT+CMOD=?
Parameter
See Write Command
Response
+CMOD: <mode>
OK
Read Command
AT+CMOD?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+CMOD=[<m
ode>]
Parameter
<mode> 0 Only single mode is supported
Reference Note
6.2.11 AT+CFGRI Indicate RI When Using URC
AT+CFGRI Indicate RI When Using URC
Read Command
AT+CFGRI?
Response
+CFGRI: <status>
OK