User's Manual

3--4
Function Operation
Electric Shock
Short press the 【 】button on the remote control, the receiving head receives the instruction
to start the electric shock, and the electric shock lasts for 2-3 seconds.
Vibration
Short press the【 】button on the remote control, the receiving head receives the instruction
to start the vibration, and the vibration lasts for 3-4 seconds.
Beep
Short press the 【 】button on the remote control, the receiving head receives the instruction
to start the buzzer, and the buzzer keeps sounding for 2-4 seconds.
Receive Head Power Query
After inserting the Type-C cable into the USB charging head, plug the other end into the
receiving head. If the charging cable is inserted into the receiving head, When the charging
line is pulled out of the receiver ,the receiving head buzzer will beep once, indicating that the
receiving head is fully charged. If the receiving head buzzer beeps twice, it indicates the power
of the receiving head is only half. If the buzzer beeps three times, it indicates that the power of
the receiving head is too low and needs to be charged.
Intensity Adjustment
Short press the 【 】 button on the remote control, then press and hold the【 】button, while
rotating the knob on the top of the remote control to adjust the intensity of the electric shock;
Short press the 【 】button on the remote control, then press and hold the【 】button, while
rotating the knob on the top of the remote control to adjust the vibration intensity;
Short press the【 】button on the remote control, then press the 【 】 button, and rotate
the remote control at the same time The top knob can adjust the time of the buzzer;
Note: Level 0 is closed, level 1 is the weakest, and level 99 is the strongest.
Electrical Specification Description
Item
Description
Rated charging voltage/current
5V/ 0.5A or 5V/1A
Power supply
3.7V/300mAh Lithium battery
Remote Control Distance
<1000 Meters
Battery Power Consumption
The receiver works continuously, electric shock:
about 2 hours, vibration: about 1.5 hours, buzzer:
about 3.2 hours, remote control: standby: 90 days,
the specific time is different due to habitual
operation.
Volume Size
Remote:193×50×24mm;
Receiver: 90×46×31mm