User's Manual

2--4
10: Electric Shock Contact 11: Buzzer 12: Charging Port/Remote Pairing 13: Status Indicator
Light
Package List
1* Receiver 1* Belt 1* USB Charging Line
1* Remote Control 1* User Manual 1* Box
Features
1.Use knob to quickly adjust the intensity of electric shock, vibration and beep;
2.Three modes: electric shock, vibration and beep which can meet different training
requirements;
3.Maximal control three collars;
4.Remote and collar are both with Power indicator;
5.IP67 Waterproof;
6.Power-saving design,the receiver will automatically enters the power-saving state after
3-minute static state and can be waked up quickly when is moved.
Charge
1.Charge for remote
Connect the remote with a USB charger by the Type-C cable ,LCD shows the battery symbol
starts flashing and stops flashing when sufficient charge is charged.
Battery display status: full power; More sufficient for three lattice; Slightly less than two grids,
emergency charging for 1 grid; Cannot work properly for Spaces.
2 . Charge for receiver
Connect the receiver with a USB charger by the Type-C cable,the blue light flashes 10
seconds before the charging line is inserted, indicating that the code matching is being
learned,after 10 seconds, the red light turns on, indicating its normal charging begins,after
being charged full, the red lights go off and the blue lights turn on.
Note* Receiver battery status checking: when connect the receiver with a USB charger by
the Type-C cable , Pull out the moment,,if battery power is full, the buzzer will sound 1 time, if
the battery power remaining 1/2 power,the buzzer will sound 2 times, if the battery power is
low ,the buzzer will sound 3 times.
Remote Pairing
1. Single receiving head pairing: the receiving head is plugged into the charging cable, the blue
light of the receiving head starts to flash quickly, within 10 seconds, press the【 】button or
【 】button on the remote control, the blue light on the receiving head will be fast flashing to
red, indicating that the function has been paired.
Note: If the code is unsuccessful once, you can unplug the charging cable and repeat the
above operation again.
2. Multi-receiving head pairing: After completing a single receiving head pairing, short press
the remote control 【 】key to switch the receiving head,repeat the first step.