Specifications

Introduction
blab-srn-005Pa
© CSR plc 2006
This material is subject to CSR’s non-disclosure agreement.
Page 6 of 48
_äìÉi~Ä»=îPKQ= Software Release Note
1.4 Requirements
This release of BlueLab runs on machines operating on Windows 2000 SP4 or later and Windows XP SP1 or
later. The development tools access BlueCore through the Serial Peripheral Interface (SPI); therefore, a board
supporting this (such as Casira™ or other CSR development boards) is also required.
SPI access is performed through low-level printer port access, therefore LPT1 must be available on the PC
running BlueLab.