Specifications

Issues Resolved in BlueLab v3.2
blab-srn-005Pa
© CSR plc 2006
This material is subject to CSR’s non-disclosure agreement.
Page 31 of 48
_äìÉi~Ä»=îPKQ= Software Release Note
ID Severity Description
B-7638 Minor
A demonstration version of the CVC DSP code has been added to the
av_headset_hfp application (this can be enabled by defining INCLUDE_CVC in
the project properties.)
B-7693 Major
The EnergyEstimationOn/Off functions no longer fail if the SCO sink is
connected to a source.
KEX-20 Minor
A spurious read has been eliminated from the gargle filter. This caused the audio to
sound gargled even when the filter was off.
KEX-23 Minor
A tone generation example has been added, making use of the Kalimba DSP to
generate the tones, and the VM to parse instructions typed by the user into an interface
such as HyperTerminal.
KEX-28 Minor
BlueLab3.2 kalimba examples have been updated to align with the current naming
convention. To that end modules are now named using the following convention:
$M.modName not $M_modName.
KEX-29 Minor
A demonstration of the mix operator has been added to the test_sbc_loopback
example in BlueLab.
M-399 Minor
Kalimba breakpoints are no longer lost when the Kalimba application is reloaded by the
vm.
M-412 Minor
Debug output in xIDE is no longer slower with the BlueCore host transport set to none,
and in general performance and robustness of the SPI transport has been improved.
M-427 Cosmetic
The debug transport for xIDE can no longer be 'unset' by dismissing the debug transport
dialog without making a selection; which could prevent the debugger making contact
with BlueCore.
M-442 Minor The accuracy of timestamps in the xIDE primitive trace has been improved.
M-571 Minor
If the pre-processor symbols used in a Kalimba DSP project are changed, xIDE will now
force a rebuild of the assembler source code. Previously, a manual 'clean' step was
required to force this to happen.
M-577 Cosmetic
The version of BlueLab being used in now displayed in the title bar of the main xIDE
window.
M-595 Major
Expanding certain items in the variable widget (especially pointers) could cause xIDE to
crash. This no longer occurs.
M-596 Minor xIDE can now parse debug information for code with variables declared as `volatile'.
M-599 Minor
Certain variables were displayed as ???? in the xIDE debugger. These variables are
now read correctly.
M-690 Major
xIDE should now correctly handle setting breakpoints in Kalimba DSP source files.
Previously it could refuse to set them if the file was opened from the File menu, rather
than from the project file list.
Table Appendix C.1: Issues Resolved in BlueLab v3.2