Instruction manual

∗ If users choose [PIN Method], a PIN code will be displayed on
the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen.
- On the access point, hold down the WPS connection button for a
few seconds.
- On the camera, press button. The camera will connect to the
access point.
- Press buttons or turn the dial to choose the
computer name, and then press button.
- If the computer is running Windows for the first time, users will
need to install a driver. When the screen at below is displayed on
the camera, click the Start menu on the computer, then click
[Control Panel], and click [Add a device].
28