User guide

BB2-7040 User Guide – Rev. 1.2 Page 45
Priority_Array (87) BACnetPriorityArray (commandable objects only)
SEQUENCE SIZE (16) OF BACnetPriorityValue
REAL (each element, analog output objects)
ENUMERATED (each element, binary output objects)
Unsigned (each element, multi-state output objects)
Relinquish_Default (104) (W) REAL (analog objects)
ENUMERATED (binary objects)
Unsigned (multi-state objets)
Polarity (84) BACnetPolarity (binary objects only)
ENUMERATED: normal(0)
Number_Of_States (74) Unsigned (multi-state objects only)
Units (117) BACnetEngineeringUnits (analog objects only)
12.2 Device Object Properties
The following properties are found in the Device object of the BB2-7040. In addition to standard Device properties,
configuration properties that apply at a system level to the whole device are included here.
Property Encoding
Object_Identifier (75) BACnetObjectIdentifier
Object_Name (77) CharacterString
Object_Type (79) BACnetObjectType
System_Status (112) BACnetDeviceStatus
Vendor_Name (121) CharacterString
Vendor_Identifier (120) Unsigned16
(should always return 208)
Model_Name (70) CharacterString
Firmware_Revision (44) CharacterString
Application_Software_Version (12) CharacterString
Protocol_Version (98) Unsigned
Protocol_Revision (139) Unsigned
Protocol_Services_Supported (97) BACnetServicesSupported
Protocol_Object_Types_Supported (96) BACnetObjectTypesSupported
Object_List (76) BACnetARRAY[N] of BACnetObjectIdentifier
Max_APDU_Length_Accepted (62) Unsigned
Segmentation_Supported (107) BACnetSegmentation