User guide

BB2-7040 User Guide – Rev. 1.2 Page 39
11 Programming ZigBee I/O in Basic
11.1 Web Interface Pages for Programming
Click "Apply" to change directory and refresh the file list from that directory. Only files with a suffix of .sb will appear
in this list.
Click "Select" to select the program file. This selection will apply to "Start", and also carry over to the edit and virtual
terminal pages.
Click "New" to create a new file having the name entered in the window.
Click "Start" to run the selected program in the background. Click "Stop" to terminate this program if it is an endless
loop that will not terminate on its own. If you are implementing a control loop, you will want the program to be an
endless loop.
Click "Auto" to select the file that will be started automatically at boot-up. Clear the name window and click "Auto" to
disable any previously selected auto-run program. This file name is saved in your boot configuration file, therefore you
must save your configuration file in order to retain this auto run file name through power-up.
Click "Delete" to remove a file from the local file directory.
Click "Browse" to select a file for upload from your PC. Once selected, then click "Upload" to complete the process.
To save a copy of the selected program back to your PC, right click on the selected file link (upper right), and then select
"save link as" or "save target as" (varies by browser).