User guide

BB2-7040 User Guide – Rev. 1.2 Page 36
Configuration changes at the remote device will not take effect immediately unless you check the Accept Changes box.
However, there are circumstances where you do not want to do this. If changing a number of parameters affecting how
the remote device transmits, you may wish to make several changes, followed by sending the /AC command to accept
the changes at that point.
This page shows the list of devices that have associated themselves with the BB2-7040's ZigBee radio functioning as a
coordinator. Click Discover to send the /ND command to the local radio. It will respond by sending its list of devices
which are then displayed here. Click Refresh after waiting a short time for all of the responses. Click Clear to clear the
page and repopulate the list.
Cfg Y/N column indicates whether this device is on our list of target devices for gateway functionality (ZigBee Client
Devices page).
To select a target device for Remote API access, check the corresponding box and click the API Target button. Then
proceed to the Remote API page to send remote commands to this device.