User guide

BB2-7040 User Guide – Rev. 1.2 Page 6
Once your route entry is established, open your browser, and browse to “http://10.0.0.101”. You should see the “home”
page of the BB2-7040 illustrated below.
You may now begin to browse your BB2-7040. You will need to log in with a password. There are two default user
accounts pre-configured as shipped:
User: system Password: admin
User: root Password: buster (must log in as ‘root’ to change IP address)
Once you have established a connection with the gateway, you can proceed to change its IP address. Set the IP address
and subnet mask to something more compatible with your network. If your BB2-7040 will be attempting to connect to
other IP devices, you must also specify the gateway.
You must be logged in as “root” in order to change IP address. If not logged in as root, close your browser, and re-login.
Then change the IP address and click the Change IP button. The new address will be saved to non-volatile memory