User`s manual

1
CONTENTS
General Information .................................................... 2
Introduction ............................................................ 2
Technical Specifications .......................................... 2
Installation Instructions .............................................. 4
Installation Procedure ............................................. 4
Alarm Switch Settings ............................................ 4
Indicator LEDs and Alarm Circuitry ...................... 5
Operating Pointers and Troubleshooting .................... 6
Maintenance ............................................................... 7
Warranty ..................................................................... 7
8
in material and workmanship under normal use and service. A Return
Material Authorization (RMA) number must be obtained from CSI at
the expense and risk of the Buyer. CSI’s Obligation under this warranty
will be limited, at its option, to either the repair or replacement of
defective units, including free materials and labor. In no event shall CSI
be responsible for any incidental or consequential damages or loss of
profits or goodwill. CSI shall not be obligated to replace or repair
equipment that has been damaged by fire, war, acts of God, or similar
causes, or equipment that has been serviced by unauthorized personnel,
altered, improperly installed or abused.
RMA numbers and repairs can be obtained from:
Communications Specialties, Inc.
55 Cabot Court
Hauppauge, NY 11788 USA
Tel: [phone] Fax: [phone]
www.commspecial.com
Email: [e-mail]
Or, in the Asia Pacific Region:
Communications Specialties Pte Ltd
100 Beach Road
#22-09 Shaw Tower
Singapore 189702
Tel: [phone] Fax: [phone]
Email: [e-mail]
Please have your serial number (located on the top label of the unit)
available when contacting us.