User manual

PCI-7030 User Manual 40
! Suspend Type [Stop Grant]
This item allows users to determine the suspend type.
! Suspend Mode [Disabled]
This item allows users to set a delay time. If system inactivity exceeds the delay
time, all devices except the CPU will be shut off.
! Soft-Off by PWR-BTTN [Instant-Off]
This item allows users to define function of power button.
! CPU THRM-Throttling
The ability is control how much percent of your CPU's clock speed will be throt-
tled down when the CPU overheat. You can set "75.0%", "50.0%", and "25.0%".
! PowerOn by LAN [Enabled]
This item allows users to power on the system via LAN. The choices are
“Enabled” and “Disabled”.
! PowerOn by Modem [Enabled]
This item allows users to power on the system by Modem. The choices are
“Enabled” and “Disabled”.
! PowerOn by Alarm [Disabled]
The choices are “Enabled” and “Disabled”. If enabled, the fields that follow indi-
cate dates and times of alarm settings.
! Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1)
or Secondary IDE 0 (1) becomes active. The choices are "Enabled" and "Dis-
abled".
! FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if the FDD, inter-
face, COM port, or LPT port is active. The choices are "Enabled" and "Dis-
abled".
! PCI PIRQ [A-D]#
When Enabled, the system resumes from suspend mode if an interrupt occurs.
The choices are "Enabled" and "Disabled".
! PWRON After PWR-Fail [ON/Off/Former-Sts]
Use this to set up the system after power failure. The “Off” setting keeps the sys-
tem powered off after power failure, the “On” setting boots up the system after
failure, and the “Former-Sts” returns the system to the status before power fail-
ure.
Instant-Off Press power button for instant power off.
Delay 4 Sec Press power button for four seconds to initiate power off.