User manual

23 PCI-7030 User Manual
Chapter 2 Connecting Peripherals
2.20 GPIO Header (GPIO1)
Provides a 10-pin header for Digital I/O usage. Refer to Appendix B for detailed infor-
mation on the pin assignments.
The board supports 8-bit GPIO through GPIO connector. The 8 digital in- and outputs
can be programmed to read or control devices, with input or out- put defined.
This GPIO is CMOS level (0 ~ 5V).
2.21 DVI LCD panel connector(DVI1)
Digital Visual Interface (DVI) is the standard interface for high-performance connec-
tion between PCs and Flat Panel Displays, Digital CRT displays, Projectors, and
HDTV. The PCI-7030 is able to drive a DVI connector display at a pixel resolution up
to maximum pixel lock of 400 MHz up to 2048 x 1536 resolutions @ 75 Hz
2.21.0.1 Panel type and Resolution mode selection
Customer can select display type and boot number from BIOS menu selection.