User manual

PCI-7030 User Manual 16
2.7 Parallel Port (LPT1)
The parallel port is normally used to connect the motherboard to a printer. The PCI-
7030 includes an onboard parallel port, accessed through a 25-pin flat-cable connec-
tor, LPT1.
2.8 USB Ports (USB12/USB34)
PCI-7030VG-00A1E provides up to six USBs: USB12, USB34, plus two from real I/O.
(PCI-7030G2-00A1E provides up to five: USB12, USB34, plus one from real I/O.)
This gives complete Plug & Play and hot swapping for over a hundred external
devices. The USB interface complies with USB Specification Rev. 2.0, supporting
transmission rate up to 480 Mbps and is fuse protected. The USB interface can be
disabled in the system BIOS setup.