User manual

15 PCI-7030 User Manual
Chapter 2 Connecting Peripherals
2.4 IDE Connector (IDE1)
The PCI-7030 provides an IDE channel to which you can attach up to two Enhanced
Integrated Device Electronics hard disk drives or CDROM to the board’s internal con-
troller.
One onboard IDE connector supporting up to two enhanced IDE devices (CF card is
regarded as one IDE device). Supports PIO mode 4 (16.67 MB/s data transfer rate)
and ATA 33/66/100 (33/66/100 MB/s data transfer rate) BIOS enabled/disabled
2.5 Compact Flash card Socket (CF1)
The board provides a CompactFlash card type I/II socket. The CompactFlash card
shares the IDE channel.
2.6 Floppy Connector (FDD1)
You can attach one floppy drive to the PCI-7030. You can use any combination of
5.25” (360 KB and 1.2 MB) and/ or 3.5” (720 KB, 1.44 MB, and 2.88 MB) drives.