User guide

BB2-7030 User Guide – Rev. 1.0 Page 65
19.BACnetObjectProperties
19.1 Data Object Properties (Analog, Binary, Multi-state)

The following properties are found in the Analog, Binary, and Multi-state types of Input, Output,
and Value objects. Some properties apply only to certain object types as noted where applicable.
Property Encoding
Object_Identifier (75) BACnetObjectIdentifier
Object_Name (77) (W) CharacterString
“Analog Input n”
Object_Description (28) (W) Character String
Same as Object_Name, is only alias for Object_Name
Object_Type (79) BACnetObjectType
ENUMERATED:
analog-input (0)
analog-output (1)
analog-value (2)
binary-input (3)
binary-output (4)
binary-value (5)
device (8)
multi-state-input (13)
multi-state-output (14)
multi-state-value (19)
Present_Value (85) (W) REAL (analog objects)
ENUMERATED (binary objects)
Unsigned (multi-state objets)
(no index)
(priority required when writing commandable objects)
(input objects writeable only when out of service)
Status_Flags (111) BACnetStatusFlags
BIT STRING: fault(1), out-of-service(3)
Event_State (36) BACnetEventState
ENUMERATED: normal(0), fault(1)