User's Guide

30/4140
panel. Enter your new 2 or 3 digit code. Press “STO” to
save your newly entered code. Upon saving the code,
the display will read "code changed" until any key is
pressed. To correct an error made while entering keys,
press “END” and repeat the process from the
beginning.
!
Any 3 digits are acceptable for your new Unlock
code, except 911, 000, and 119.
!
Always keep a record of any modified code
numbers. They will be necessary to access
corresponding features or to reenter new codes.
Mode Name Mode # Display Factory Setting
Unlock 1 Unlock 123
Call Counter 3 Call Count 12
Call Timer 4 Air Time 12
u Channel and RSSI Level Display
RSSI levels are the signal strength of the current channel of
operation represented in voltage. The higher the voltage (the
bigger the number) represented in the display, the better the
connection and the clearer communications will become.
By following the procedure below, the channel number currently
in use and the RSSI level will be displayed in the display panel
and will be refreshed with current data every second.
üü To display the Channel Number and RSSI Level,
simply press “FNC”, “*”, “6”.
üü To clear the display, press “CLR”.
!
The RSSI level is in dBm, and is negative.
Numbers with smaller magnitudes, which are less
negative, represent stronger signals.