User's Guide

28/4140
“2”, “0”. The temporarily accumulated number of calls
will appear in the display following the word “CALL”.
If you wish to reset this total to 0 simply press “*”,
“CLR” before exiting this mode.
üü To exit this mode, press “CLR”.
Outgoing Call Counter
This feature is used to check the number of outgoing calls.
It resets to 0 after the 10,000th call has been made.
üü To check the number of outgoing calls that have been
made, press “FNC”, “*”, “2”, “1”, while the telephone
is not in use, and enter the registered 2 digit Call
Counter access code. If you wish to reset this total to 0,
simply press “*”, “CLR” before exiting this mode.
üü To exit this mode, press “CLR”.
!
The factory default Call Counter access code is
12, but it may be changed if you desire.
Please refer to the section entitled “User
Programmable Codes”.
!
The number you enter as an access code should
be written down and stored safely!
Accumulated Call Counter
This feature is used to check the accumulated number of
calls. This total will reset to 0 on the 10,000th call.
üü To check the number of calls made, press “FNC”, “*”,
“2”, “2” and enter the registered 2 digit Call Counter
access code while the telephone is not in use. The
accumulated number of calls will appear in the display
following the letters “C-C”. If you wish to reset this
total to 0 simply press “*”, “CLR” before exiting this
mode.
üü To exit this mode, press “CLR”.