User's Guide

26/4140
tones during conversation mode.
üü From a memory location:
Press “RCL” and “*”, then up arrow, down arrow, or
numeric entry (or M1 key) to select a memory location.
When the desired number is displayed, press “SEND”,
and the DTMF digits will be sent. The DTMF tones
will be heard at the other end in conjunction with the
telephone number recalled and displayed.
u Timer and Counter Functions
Elapsed Time Display
While the IN USE indicator is lit, the clock in the center
line of the display panel will keep a running total of
elapsed time from the time of connection for that call in
minutes:second format. After call completion, this function
will display the total elapsed time (spent on-line) of the last
call made.
üü To display the elapsed time in the display panel, press
“FNC”, “*”, “3”, “0”. The word “Air” will appear in
the display panel.
!
The time count will reset to 00:00 after 99 minutes
and 59 seconds.
!
When the call time is displayed using “FNC”,
“*”, “3”, “0”, the time display does not reset
until 9999 minutes and 59 seconds.
Outgoing Call Timer
This function is used to time your outgoing calls. The timer
resets to 0000:00 after 9999 hours and 59 minutes.
üü To display the value for outgoing call times, press
“FNC”, “*”, “3”, “1”, then enter the registered two-
digit Call Timer access code.
üü To manually reset the Outgoing Call Timer to 0000:00,
press “*”, “CLR”.