User's Guide

15/4140
When a “Cellular System” busy signal occurs, the
Automatic Redial function can be used to redial a
telephone number automatically (up to 3 times) at regular
intervals 30 seconds apart.
üü To change Automatic Redial Mode, press “FNC”, “*”,
“7”, the 3-digit unlock code, then up arrow or down
arrow to enable or disable auto redial, and “STO”
consecutively.
üü To abort Automatic Redialing while in progress, simply
press the “END” key.
!
A distinction should made be between a “Line busy
signal” and a “Cellular System” busy signal.
(Automatic Redial will initiate only on a “Cellular
System” busy signal.)
u MIC Mute
The MIC MUTE function deactivates the microphone located in
the mouthpiece of your phone so you can converse at your
location and not be overheard by the party on the line.
üü To toggle the MIC MUTE mode ON, press the “MUTE”
key. The MUTE indicator “MUTE” should now be lit.
üü To deactivate MIC MUTE mode, just press the MUTE
key again. “MUTE” should go dark and normal
conversation can be resumed.
!
The Mute mode will automatically be released when
the conversation is terminated.
!
The”M1” key can be used as One-Touch Dial Key
when not in conversation.