User's Manual

13/33
To display the number of the third most recently made call press “RCL”,
“#”, “2”.
!
If you wish to dial one of these numbers, press the SEND
key.
Automatic Redial
When a “Cellular System” busy signal occurs the Automatic Redial
function can be used to redial a telephone number automatically (up to
3 times) at regular intervals 30 seconds apart.
The “Auto- Redial” will
light on the display to indicate Automatic Redial has been initiated.
üü To change Automatic Redial Mode, press the FUNCTION key
“FNC”,”*”,”7”, the 3-digit unlock code, then up arrow or down arrow
to enable or disable auto redial, and the “STO” key
consecutively.To initiate Automatic Redial, press the FUNCTION
key “FNC”,”*”,”7”, and 3-digits code, then up arrow or down
arrow to enable or disable auto redial, and the “SEND” key
consecutively.
If want to save the automatic redial control status then press the
“STO” key to save the change.
üü To abort Automatic Redialing which is in progress, simply press the
“END” key.
!
A distinction should made be between a “Line busy signal”
and a “Cellular System” busy signal. (Automatic Redial
will initiate only on a “Cellular System” busy signal.)
u MIC Mute
The MIC MUTE function deactivates the microphone located in the mouth
piece of your phone so you can converse at your location and not be
overheard by the party on the line.
üü To toggle the MIC MUTE mode ON, press the “MUTE” key.
The MUTE indicator “MUTE” should now be lit.
üü To deactivate MIC MUTE mode just press the MUTE key once again.
“MUTE” should go dark and normal conversation can be resumed.
!
The Mute mode will automatically be released when the
conversation is terminated.