User's Manual

In-call features
16
In-call features
The following options are only available once in a call and some
only become available in specific circumstances, for example:
the conferencing option does not exist until there are two or
more calls.
Call hold
While on a call it is possible to place a call on hold*.
1. To place a call on hold press Hold.
2. The phone will momentarily display Call Held.
3. The display will then display the number of the caller and
On Hold.
4. To revert to normal operation press Unhold.
5. The phone will momentarily display Call Retrieved.
* See System dependant features on page 23
.
Mute
1. To mute the microphone press Mute.
2. The phone will display a circle with a line through it in the
lower right corner to indicate that the phone microphone
is muted.
3. To revert to normal operation press Unmute.
Place an additional call
While on a call it is possible to place an additional call*.
1. While on a call press Opt.
2. Using the 4-way navigation key highlight New Call and
press OK.