User`s guide

21-0381E v4.7.3
Welcome Report
Control Admin S ys Config Tech-Ref
59
Controlling an Area or Device
Open the applicable "View", and (locate) and
select the desired device
(Details:
Previous/above)
.
Then, right-click the device and select your
desired action from the pop-up menu.
Jumping to the Control & Status Form: Right-click
the area or device and select "Switch to Control &
Status Screen for this Item" from the pop-up menu.
Dealing with Alarms
When an alar m occurs, alw ays verify what
caused it. Be sure to dispatch someone
to deal with any conditio ns that r equire
attention.
-------------------------
To silence an alarm, right-click the spec ific
'Area' on the map, and select Silence.
To set the event/monitoring window to show all
events associated with a de vice or area, right-
click the item and select " Resolve and Show
All E vents for This Item ". To v iew o nly t he
alarms associated with a device or area, right-
click the item and select "Resolve".
For more information on working with the monitoring
window, refer to "Monitoring System Activity".
-------------------------
To enter a co mment and s et a single-alarm
as having be en resolved ( or not), click the
coloured box on the left of the alarm
message. When the small screen appe ars,
enter a sui table comment and select
[Resolved] or [Keep Unresolved].
To enter a co mment and se t all
alarms for a
device or area as 'Resolve d' (or not), rig ht-
click the monitoring w indow and select
"Resolve All ". Then, e nter a suitable
comment, and select [Resolved] or [Keep
Unresolved].
( Ö )