User`s guide
21-0381E v4.7.3
Welcome Report
Control Admin S ys Config Tech-Ref
55
Accessing This Feature (Visual
Director)
See if you're already connected with
the panel(s) by checking th e status
bar at the bot tom of the monitoring
window.
Multi-Account Sy stems: First
select
[Account Fol ders] in the 'tree',
and double-click the desired account.
If not presently connected, initiate a
connection as described previously/above.
Exception: If you will only be viewing or controlling
cameras, you do not need to initiate a panel connection
Topic Locator:
Using the M yTools Bar : Select " Visual
Director" from the MyTools bar (and logi n with
your user ID and PIN if prompted for this).
Using the T ree: Click your site/account button
in the tre e, open Control & Sta tus, and Panel
Control & Sta tus (click the " +"), and login with
your user ID and PIN if prompted for this.
Then, select " Visual Directo r" under "P anel
Control & Status".
If this feature is not present: This feature is available
only to operators with permission to access ALL
configuration topics. You may also need to upgrade
your software licensing.
Related + "Operator Permissions".
Topics: + "Software Activation and Licensing".
Multi-Panel Systems
: Maps are not limited to individual
panels (and cameras are not related to panels).
Automatic Login
: To set the 'login' to occur
automatically for a specific operator, refer to the section
on "Operators".
Selecting Views
When 'in' the visual-director screen, defined
map/camera 'vie ws' appea r on the "views
toolbar"
. ( Default P osition: T op-right corn er of the
screen).
Views that co ntain alarms are
indicated with a flashing alarm-clock.
To open a desired 'vie w', select it o n the
toolbar.
Event-Triggered Cameras: These appear in 'camera-
views' that show the last triggered camera (pertaining to
the specific 'camera-view'). Exception: This type of
window closes when you select a different 'view', or
move to a different screen/topic.
If you see a small down-arrow on the end of the toolbar,
you can click it to access additional map/camera views.
Note
: If your display mode is set to 800x600, you may
need to hide the view-names on the toolbar to allow
accessing the down-arrow. (Right-click the "Views"
toolbar, and deselect Show Button Captures.)
The bars on the left end of the toolbar allow you to drag
it to a new position if desired (in a fixed location, or
floating above the desktop). Tip: If you 'drop' it in an
undesired location, click [Restore] on the main toolbar.
Moving Around and 'Zooming' In or Out
To enlarge a map or camera image, double-
click the image (a blank area). To return to the
previous size, click [Return].
Similarly, if your maps include links to cameras
and/or other maps, you ca n double-click a link
to view the image.
(Method 2: Right-click the link, and select Go to Link.)
When you're ready to go ba ck to the prev ious
map, click [Return].
If Area/Device Icons are Grey in Colour: This means
you are not connected with the specific panel or
account. For details, see: "Connecting to the
Associated Panel(s), An Overview" (previous/above).
If Camera(s) are Not Available
: This may mean that the
applicable Netvision capture station is not running.
Camera Control and Adjustments
: You can easily aim
or zoom any camera that supports Pan-Tilt-Zoom
operation. A number of other camera controls are also
provided.
QuickRef: (bottom of camera window).
Also: T
ools, ÖOptions, Ö(Visual Director )
Camera Status/Control and Adjustments
(a following section).
-------------------------
Full-Screen: To make th e Visual Dire ctor
window fill th e whole scre en, double-click its
title-bar twice
. (To return to normal, do uble-
click the title-bar once again, and click [Reset]
on the main toolbar.)
The 'Views' Toolbar
The "Views" toolbar provides access to all map/camera views
that are presently set up.
To show or hide the view-name text in the toolbar:
Right-click within the title-bar, and select "Show Button Captions".
Also See: "Initial Set Up of: Views, Maps, Cameras"