User`s guide

44 VEREX Director V4.73 User's Guide 21-0381E v4.7.3

Photo-Verification

Introduction

Each operator can select d oor(s) to have the

stored photo for entrants displayed each time

someone gain s access (or is denied entr y) at

any of the selected door(s). The last 1, 4 , or 9

entrant's photos can be displayed.

The photo ca n then be us ed to verify each

entrant's identity. This can be done locally--

such as by an attendant in a reception area, or

remotely through a camera on a map.

This feature is configurable separatel y for each

operator (as described in a following section/below).

This pertains to the photo associ ated with

each card/person in the "Users" screen.

For detail s, see "The Photo-Bad ging

Option".

Connecting to the Associated Panel(s),

An Overview:

This feature w orks only w hile you are

communicating w ith the specific panel(s). To

establish a connection:

1) See if you're already connected by

checking the status bar at the bottom of

the monitoring window.

Multi-account systems: Ensure your desired

account is selected (click [Account Folders] in the

tree, and then double-click the specific account).

2) If not connected, check to ensure the

communication software is running on

the specific PCs.

Detail: If the LCD/Telephone icon on the Windows

taskbar is black-and-white (colour = running), start

the communications service by right-clicking the

icon, and selecting "Start Communications".