User`s guide

ManualsBrandsCSG Security ManualsComputer equipmentNVeDVR

361

362

363

364

365

366

367

368

369

370

21-0381E v4.7.3

Welcome Report Control Admin Sys Config

Tech-Ref

353

Setting Up Automated User

Imports

Notice: As a precaution before setting up

this feature, ensure you have an up-to-date

backup copy of the database.

For details, refer to "Backing up or Restoring

the Database".

1) Select [Management] in the 'tree'.

2) Select Database Maintenance,

and open User Import.

3) Then, refer to the item-descriptions

for this screen while making your

selections.

- Enable Periodic Processing of User Import

Table: Select this to 'turn on' the automated

card import feature.

- Period (in minutes): This is how long Director

will wait before processing the 'ErmUserImport'

table again (e.g., 15 minutes = 4 times per

hour);

Note: As discussed under "Conceptual Aspects", and

"Software Interface ("Middleware") Tasks" -- both

previous/above, it is the responsibility of your custom

software to update the table with the desired

commands and data--which will then be processed by

the Director software at the time intervals selected

here.

- [Process User Import Table Now]: This

causes Director to process the table right away,

rather than waiting until the next scheduled time.

[Management] ÖDatabase Maintenance

ÖUser Import 

Ensuring Panels are Updated

To ensure panels are upda ted regularly, you

should set up scheduled communications

sessions for the panel(s). Tip: For any

panels that are already connected/online, the

update will occur automatically.