User`s guide

21-0381E v4.7.3
Welcome Report Control Admin Sys Config
Tech-Ref
315
- Description: This is any suitable text
to describe the specific workstation.
- Permissions: This selects a
(previously-defined) permission-set to
determine what features will (or will
not) be available through this specific
client workstation (for operators who
also have permission for each specific
feature).
Tip: If no permission-sets are listed, this
means they need to be set up. Follow
Operator Permissions: Select this if
feature-access is to be limited only by the permissions
assigned to each operator.
Communications Client Software
: The permission
setting does not apply to communications client
software (this setting will be ignored).
Related Topics:
Operator Permissions
Scheduled Event Filtering for Operators
Setting Up Client Permissions (to follow).
- Validation Certificate: This area shows
details on the certificate file that is presently in
effect for this communications client.
Notes: This applies only for secure (encrypted) IP
communications. If this is left blank, any certificate
assigned for the server will be used if needed (see
previous/above). This would typically apply to smaller
systems.
- […] (Add Certificate): Click this to browse for,
and assign a certificate. (VVC file).
- [X]
(Remove Certificate): Click this to unassign
the certificate that is presently in effect.
More: Secure IP Communications
Also See: Assigning a Certificate to the Director
Server (previous/above).
[Management] ÖPC Access ÖClient Access