User`s guide

314 VEREX Director V4.73 User's Guide 21-0381E v4.7.3
- Client Description (bottom of form): This is
where you select a client workstation (or
communications client) to view or edit. This
area shows the name of each defined client
workstation;
- Cyclic ID: This is a 16-digit number obtained
from each VEREX Director client PC (under
"About..." from the Help menu on each specific
PC).
Tip: To check that you entered a correct value, click
[Save] on the toolbar, and watch for the symbol to
change (see below).
Note: A different number will appear each time you
open the "H
elp, About" screen. Any of these
numbers can be used for the specific PC.
- Symbol / Icon: This indicates the type of
software associated with each "Cyclic-ID" that
you enter.
(Click the Save button on the toolbar, and
watch for the symbol to change.)
8: This indicates an invalid ID-code, or that the other
PC is not presently available through the network;
LCD Keypad Symbol
: This indicates a client
workstation (VEREX Director software);
Communications Symbol
: This indicates the
communications software (to allow a panel
connection).
You can count the number of each type of symbol, and
compare this against the number allowed as per your
software licensing.
To check the number of software and communications
clients allowed, open the H
elp menu, select [About...],
and then [License Info.].
-------------------------