User`s guide

278 VEREX Director V4.73 User's Guide 21-0381E v4.7.3
Custom Circuit-Types
Newer styles of modules support custom
circuits for input points, while any older-style
modules will continue to s upport the sta ndard
circuit-types.
Tip: Suitable default values are provided here for north
America, Europe, and UK-ACPO (per panel mode).
The defaults typically need to be changed here only for
sites that require custom/different values.
Note
: The specific circuit-type for each input point is
selected when setting up an input point (or suite-
security keypad).
How to Get Here
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
MyTools Bar: Custom Circuit
In the Tree
: Configuration (+), Input Points,
ÖCustom Circuit
(Under the specific panel group
and panel--if listed in the 'tree'.)
Related Topic: "Other Desktop Choices"
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode (forms view is recommended
here).
Things You Can Do
• View/Change a Custom Circuit Type:
1) Select the 'tab' for a desired circuit (1-4).
2) Select the desired circuit type near the top
of the screen.
3) Check the onscreen illustration to verify
your selection.
4) If needed, enter new resistor values, and
click [Calculate Thresholds].
For more in formation, refer to the item-
descriptions for this screen.
Custom Circuit-Types for Input Points (≥V4.4)