User`s guide

21-0381E v4.7.3
Welcome Report Control Admin
Sys Config Tech-Ref
273
- Area / Door: For area and door commands,
select the target item here.
Without Multiple Panel Command: This lists areas or
doors for each panel (in the panel-order as shown in
the 'tree').
With Multiple Panel Command
: This lists area/door
numbers (or "All"), and will affect all panels in the
account.
- Panel: For a single-panel command, select the
panel here.
-------------------------
Blue Text at the Bottom
This sho ws a reminder of the your sele cted
command, and the selected panel (if
applicable).
Tip: If a panel is NOT shown, this means the
command will affect all panels (i.e., a 'multi-panel
command').
-------------------------
Notes / Attention:
• Multi-panel and cross-panel commands are routed
through the Director software. As such, the source
and target panels must be communicating with the
Director software when the input/button is tripped.
• Other than issuing the specific action, command-
points are monitored only for 'Tamper' conditions (re:
Transmit, Sonalert, and Siren).
• Command Points are fixed as 'Supervisory'.
Related Settings
: Configuration, ÖCustom Point
Types.
See: Input Points—Custom Point Type (to follow).
About Video Events
Video events are specific e vents pertaining to
input points and doors that have been
associated with recordings from one or t wo
specific cam era(s). The se appear with a
camera symbol on the left in the event
monitoring window.
Clicking the c amera symbol allo ws viewing the
recording for that camera at the time of the
event. If a video that coinc ides with the event
is available, it will open and start playing
automatically starting at the time of the
triggering event.
Note: Playback for video events is NOT supported for
March R4 DVRs.
 Video Events 
Note: This tab will appear only if at least one camera is
presently defined.
Also See: Setting up Video Events".
First Camera
- Select Camera: This allows selecting the first
(or only) camera to be associated with alarms
pertaining to this sensor (input point).
- Alarm: Sets whether or not alarms from this
sensor/input point will be associated with the
selected camera.
Second Camera
- Select Camera: This allows selecting a second
camera to be associated with alarms from this
sensor/input point. This allows for a second
camera-angle for video-events pertaining to this
sensor/input point.
- Alarm: Sets whether or not alarms from this
sensor/input point will be associated with the
second camera.