User`s guide

21-0381E v4.7.3
Welcome Report Control Admin
Sys Config Tech-Ref
263
Pick-Lists (Bottom of the
Form)
-Panel Group & Panel references (optional):
This is where you select a specific panel-
group and panel in a multi-panel system
where the 'tree' is not
set to show items on
a panel-by-panel basis. For more
information on this feature, refer to "Other
Desktop Choices".
- Elevator: This is where you select an
elevator to view or edit. This area
shows a reference number assigned
by the system, and the name of the
elevator, once defined;
If the Name is Shown as "Door" (and the form is
blank): These screens are placeholders for doors
(click [Filter] on the toolbar to hide door references).
"Offset" values for each panel determine whether
multi-panel sites will have consecutive versus
repeating elevator/door numbers. For details, refer to
the "Display Offsets" value under "System Panels and
Displayed Item-Numbers".
Top of the Form
- Name: A suitable name/location for the
elevator (lift) cab;
 Standard 
- Module: The number (from the MODULE
screen) for the elevator controller module
associated with the elevator cab.
- Port Number: Whether this is the 1
st
or 2
nd
elevator on the selected elevator-controller
module;
- Token Format: The card/token format
associated with this elevator (lift) cab. Up to
two card/token formats are supported for each
panel, as defined through the System Access
screen.
"Wiegand" pertains to cards/tokens for readers with
Wiegand data-format (Wiegand, Proximity, etc.).
Similarly, "Magstripe" pertains to cards for readers
with magnetic-stripe output (magstripe, bar-code,
etc.).
For details on setting up the card/token format, refer to
"System Card-Access Settings".
- LCD Name: A shorter version of the name to be
displayed at LCD keypads. This is assigned
automatically, and can also be changed if
desired (max. 12 chars., plain text).
Configuration ÖElevators (1
st
tab shown)