User`s guide

232 VEREX Director V4.73 User's Guide 21-0381E v4.7.3
The System Access Screen
Facilities that include Door Control mo dules
provide integrated access-control (who can go
where and when) as a se amless adjunct to
security and monitoring features. The System
Access s creen contains ca rd-format setti ngs,
and other card-access settings for a panel.
Two card types can be set up, allowing either Wiegand
/ Prox and Magstripe/barcode, or two types of Wiegand
/ Prox cards to be used with each specific panel.
How to Get Here
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
MyTools Bar: System Access
In the Tree
: Configuration (click the "+"),
ÖSystem, ÖAccess
(Under the specific panel
group and panel--if listed in the 'tree'.)
Related
Topic: "Other Desktop Choices"
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode (forms view is recommended
here).
Things You Can Do
View or chan ge settings a s desired for the
specific panel (see the selection-descriptions).
Settings Needed for C2000 Units (UK)
• Token Type: Wiegand;
• Card ID--Position and Length: Ignored;
• Card ID--Bits per Card: 32;
• Odd parity--Position/Start/Length: 32/14/18;
• Even parity--Position/Start/Length: 1/2/18.
Disabling Odd or Even Parity-Checking
If odd or even parity-checking is not desired, or
the position and start values are not known:
• Ensure 'position' and 'start' are set to any
non-zero value (1-40);
• Set the length to 0 (zero).
Pick-List (bottom of the form)
-Panel (optional): If the tree is not set to show
items on a panel-by-panel basis, you will be
able to select a panel here (for systems that
have more than one).
A "Panel Group" reference may also be shown here,
or
you can set the 'tree' to list configuration topics
separately for each panel. For more information, refer
to "Other Desktop Choices".
 Standard  and  Alternate 
(for 1
st
& 2
nd
card formats to be used at the same time)
Two card types can be set up, allowing either Wiegand
/ Prox and Magstripe/barcode, or two types of Wiegand
/ Prox cards to be used with each specific panel.
All length values refer to number of characters for
magnetic stripe cards (MS), or number of bits for
Wiegand technology (W).
- Token Format: This allows defining
parameters for the basic card/token types (as
selected for each specific reader).
"Wiegand" pertains to cards/tokens for readers with
Wiegand data-format (Wiegand, Proximity, etc.).
Similarly, "Magstripe" pertains to cards for readers
with magstripe output (magstripe, bar-code, etc.).
-------------------------
- [Wiegand 26]: This automatically sets the card-
format values for the standard 26-bit Type-A
Wiegand format.
- [Wiegand 36]: This automatically sets the card-
format values for the proprietary 36-bit Wiegand
format.
Card Site (Site/System Code)
- Site Required: This enables/disables site code
checking. If selected, cards without one of the
specified site codes will be denied access.
- Site Code 1, 2, 3: If site-code checking is
enabled, only cards encoded with one of these
site codes will be allowed access at this site
(e.g., 0004, 1234, 9999).
- Position: The start position of the site code
(1-40);
- Length: The length of the site code (MS: 1-4;
W: 1-16).
System Card-Access Settings