User`s guide

226 VEREX Director V4.73 User's Guide 21-0381E v4.7.3
VBUS Outputs and Parallel STU Outputs
(xL Panels)
xL panels support o ne 8-output ST U
(w/configurable base valu e), plus thre e 8-
output VBUS boards (w ith contiguous o utput
numbers starting at a s ingle programmable
base value). A total of four VBUS board s are
supported if a parallel STU is not present.
In addition to the settings p ertaining to VBUS
and parallel STU outputs, the "Panel on board
outputs" valu e must inclu de the number of
STU and VBUS outputs--plus the tw o o n the
panel itself for a grand total.
This is select able as multip les of 4 only ( 4, 8,
12, etc), so select the nex t higher value if
necessary.
Attention: VBUS and ST U outputs will NOT
be recognized if the panel onboard outputs
value does not account for all of the se outputs
as described here.
Intrusion Settings for a Panel (≥V4.4)
The System Intrusion screen
This screen provides access to various
intrusion settings that pertain to a specific
panel.
Tip: You can also use the Configuration Wizard to set
up a new system. (Look in the T
ools menu).
How to Get Here
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
MyTools Bar: System – Intrusion
In the Tree
: Configuration (click the "+"),
ÖSystem, ÖIntrusion
(Under the specific panel
group and panel--if listed in the 'tree'.)
Related
Topic: "Other Desktop Choices"
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode (forms view is recommended
here).
Things You Can Do
View or chan ge settings a s desired for the
specific panel (see the selection-descriptions).